Battery Replacement for the A4n Tag

  1. Remove the four screws at the corners in the back of the tag.

    Battery

    Note

    Ensure you are well grounded before touching any components on the printed circuit board (PCB).

  2. Unplug the battery connector from the PCB and remove the battery.

    Battery

    Note

    Do not touch the PCB after connecting the battery to avoid damaging the tag circuitry or resetting the device.

  3. Replace the battery and connect it to the PCB.

    Battery
  4. Reassemble the device and press the blue button.

    Flashing LEDs will confirm that the tag is working correctly.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.