Activation, Deactivation, and Resetting

A1 Activation

Press and hold the button for at least six seconds until the LED flashes blue and red. Then release the button and quickly press it again. (There is no need to hold it down the second time.)

A1 Deactivation

The A1 tag deactivates automatically after 15 minutes when it is not in motion nor close to another tag or gateway. To deactivate it manually:

  1. Press and hold the button for at least six seconds until the LED flashes twice.
  2. Continue pressing the button until the LED flashes blue and then red three times.
  3. Release the button and give it a quick press. The tag will flash blue and red three more times before deactivating.

Resetting the A1 Tag

Resetting the tag causes all settings to return to their defaults and clears the tag’s memory.

  1. Ensure the tag is deactivated as described above.
  2. Press and hold the button for at least six seconds until the LED flashes blue and red twice.
  3. Release the button.

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.