Battery Replacement

  1. Remove the two screws at the corners of the tag’s back side.

    A3 backside.jpg
    The encapsulation will come apart.

    Note: Be sure you are well grounded before touching any components on the printed circuit board.
  2. Unplug the battery’s connector to remove it.

    A3 Battery Replacement.jpg
  3. Connect the new battery and avoid touching the printed circuit board.
  4. Reassemble the enclosure.
  5. Press the button to ensure the LED flashes.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.